网卡不通
Centos 配置eth0 提示Device does not seem to be present
2014年10月27日 21:16:54 xiaobei4929 阅读数:75888
一.故障现象: [root@c1node01 ~]# service network restart Shutting down loopback insterface: [ OK ] Bringing up loopback insterface: [ OK ] Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED] 解决办法: [root@c1node01 ~]# rm -rf /etc/udev/rules.d/70-persistent-net.rules [root@c1node01 ~]# reboot ……………… [root@c1node01 ~]# service network restart Shutting down loopback insterface: [ OK ] Bringing up loopback insterface: [ OK ] Bringing up interface eth0: [ OK ] [root@c1node01 ~]# 二.另一种方法 造成这样的原因,是因为在虚拟机(Vmware)中移动了Centos系统对应的文件,导致重新配置时,网卡的MAC地址变了,输入ifconfig -a,找不到eth0 ······· 安装完一个centos虚拟机,又拷贝一份,开机后网卡无法正常启动,报错:Device eth0 does not seem to be present, 可删掉uuid、物理地址 三.比第一种更深入一点
delaying initialization
解决:# mv /etc/sysconfig/network-scripts/ifcfg-eth0
sysconfig/network-scripts/ifcfg-eth1
vim
sysconfig/network-scripts/ifcfg-eth1
修改DEVICE="eth0"
为DEVICE="eth1"
然后重启启动网卡尝试下